Try different background
Digital Information


Operating the DJet for Epson requires:

  • 1x Digital Information Djet KitDI-Plot and DI-Pilot software package.
    Standing rack for Epson Surecolor T-7000, T-5000 or T-3000 inkjet printer.
    2x Video Camera.
  • 1x Computer for DI-Pilot and DI-PlotCPU Intel Core i7, 1x 500 GB, 7200rpm hard disk drive, 1x 64 GB Solid State Drive, 4x USB ports, 2x Ethernet ports, TFT monitor with 19” screen (touchscreen recommended).
    Note: You need to have a small SSD Drive in the PC. The system needs the SSD drive because of their astonishing performance when writing a lot of small files which DI-Pilot does when it communication between printers and its cameras.
    Both Epson T-Series printers are connected via USB and Ethernet.
  • 2 x Epson SureColor Inkjet Printer
    SC-T 3000 up to 22’’/56 cm printspan or
    SureColor SC-T 5000 up to 34’’/86 cm printspan or
    SureColor SC-T 7000 up to 42’’/106 cm printspan.
  • Cables, Hub, Switch and Power Outlet Strip
    (not part of the Digital Information Kit)
    4x RJ45 Cat 5 Ethernet cable Length: 2m, 2m, 3m, 5m.
    1x Ethernet Switch 10/100/1000 min. 4 ports or more.
    2x shielded USB 2.0 cable, “USB-mini B” to “USB-A”, used for camera connection, minimum length is 2 meter, goes to USB Hub.
    2x shielded USB 2.0 cable, “USB-A” to “USB-B”, used for connecting the two printers via USB HUB to the PC, minimum length is 3 meter.
    1x shielded USB 2.0 cable, “USB-A” to “USB-B”, used for connecting the USB HUB with the PC, minimum length is 2 meter.
    1x active 4 port USB Hub (runs with a Power Supply), connects the two cameras and the two printers to the PC.
    1x Power cord 3m length (for printer bottom as the one delivered by Epson is to short).
    1x Power Outlet Strip with minimum 6 outlets: 2x Printers, 1x DC PowerSupply (LED Bar Lights), 1x USB Hub, 1x Ethernet Switch.

DJet - Free sample print out

Fill out the form below and we'll send you a sample printout of the Preproofer Epson.